Search:

In 2011 the Spring was super wet. I don't remember inches but it was way over normal. The Spring of 2012 was just as bad. My house was built in 1900 and had a brick foundation and floor. The basement...

That Dodge is awesome! I can imagine the Corvette is also.

The fuel injection systems made for replacing a carburetor are nice and convenient but anyone with a larger than stock cam beware. The self learning of the systems always gets way too rich if the cam...

No it is the spring rings inside the steering gear that gives the "road" feel to the power steering. The stage three has almost no assist, just enough so you don't get worn out driving the car.

Cool, I bet the car does very well!

Have the systems charged and then take time throughout the year to try and find a shop or company to make up the new rubber lines. I need to do the same as my lines are all from 1977 lol!

DORMAN 84803 Replace with new. RockAuto.com has them.

Unless you would have some type of very old unit or naturally a lockup unit the shafts should all be the same as far as the hundreds I have done.

Put this code in the box that has "how did you hear about us" for the title. 123674885115616793 you will get a 5% discount. Code is supposed to be good until 1/12/2020

Received the calipers this evening. Took everything out of the box and they look pretty good.......not 100% smooth or perfect but good enough. Everything came that was pictured on E bay.
As promised...

I just ordered a whole set from Ebay. Classic Performance Products. Calipers, pads, anti-rattle clips and hold down bolts. $112.10 out the door no shipping charges, no core charge and they are powder...

Well said and absolutely true.

Just in case you need any more info or have not checked RockAuto for a new ignition switch they list two that fit with a flat connector. WVE/AIRTEX/WELLS 1S6141 and STANDARD MOTOR PRODUCTS US88

Congratulations Matt! Great to hear of the sale! Good luck!

Yes the egr does get the exhaust from the cross over but that is just a start. It is impossible to see all the carbon buildup through that port. A pile of carbon that can be cleaned out would...

I have had my '77 out many times this summer to car shows and cruises. The first car show I went to early summer was the first time I had ever entered a vehicle in a show so I did not know the ins...

Very Nice! It is always nice to get recognition for your efforts.

A day late on reporting but I took my 77 in for a front end alignment yesterday morning. Now on to cleaning it up and getting the stripes put on. I am waiting for my Firm Feel E body leaf springs...

Cut out the cross member frame in the tunnel area. Weld in 1/16" steel to put reinforcement back into the floor. Install a universal 3" drop cross member to your added frame connectors and wire it...

82-92 t-top seals for the camaro and/or firebird.

Looks nice! I took mine down the road for a short trip of about 1.5 miles yesterday. I just wanted to make sure the trans shifted and get a feel for how it may perform as the car has not been...

51015102

I am trying something new. These are the latest pictures of my project. I resized them. I hope it works. I will post more if they come out properly.

Cool! Glad to see it is moving.

The car is looking good 76sassygrass! I have my interior in also with the exception of needing a headliner made.

Glad to see it progressing. I have been progressing slowly on mine. The interior is getting close. I don't have pictures. I have not had time to resize them to put on the site. I have way too many to...